LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> S550e >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Air Intake, Turbocharging - 222 Chassis >> Testing & Repair >> Remove/install circulation pump for low-temperature water circuit >> Remove/install circulation pump for low-temperature water circuit - AR09.41-P-6925LFA

Remove/install circulation pump for low-temperature water circuit - AR09.41-P-6925LFA

ENGINE 276.8 in MODEL 217, 222 

MODIFICATION NOTES

17.11.2015 Drain off coolant from low-temperature water circuit. Operation step 2 supplemented to include document reference  
Fig 1: Low-Temperature Water Circuit Circulation Pump Remove/Install Components
G11132044Courtesy of MERCEDES-BENZ USA
DANGER Risk of injury  to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning  from swallowing coolant. Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.
AS20.00-Z-0001-01A
NOTES Notes on coolant   AH20.00-N-2080-01A
REMOVINGINSTALLING Remove/install     
1 Remove lower engine compartment paneling   AR61.20-P-1105LF
2 Drain off coolant from low-temperature water circuit   AR09.41-P-6834LFB 
    IMPORTANT Collect coolant in a suitable container.
FLUID Coolant mixing ratio
*BF20.00-P-1001-04A 
3 Disconnect electrical connection (4) at low-temperature water circuit circulation pump (7)    
4 Detach coolant hoses (1, 2) at circulation pump for low-temperature water circuit (7) IMPORTANT Collect coolant in a suitable container. AR20.20-P-7441-01RQ
5 Remove screw/bolt (3) and remove the bracket (5)    
6 Remove low-temperature water circuit circulation pump (7)    
7 Install in the reverse order    
INSPECT Check     
8 Check low-temperature water circuit cooling system for leaktightness   AR20.00-P-1010LF
DANGER Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. AS00.00-Z-0005-01A
9 Perform an engine test run; check cooling system for proper operation and leaktightness    
COOLANT MIXING RATIO

Number Designation Engine all
BF20.00-P-1001-04A Coolant mixing ratio Antifreeze/water Up to -37°C % 50/50
As of -38 °C % 55/45
Specification   Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specification   Anticorrosion/antifreeze agents (Specification 325.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specification   Premixed coolant (Specification 326.0). See https://bevo.mercedes-benz.com/index.php?language_id=1