Remove/install rear door holder - AR72.12-P-2100LFS
MODEL 222 with CODE Z07 (Top protection)
| Remove | |||
| 1 | Remove window lifter from rear door | MODEL 222 with CODE Z07 (Top protection) with CODE Z13 (Left rear power window with special protection) with CODE Z14 (Right rear power window with special protection) |
AR72.12-P-1810LFS |
| 2 | Press door holder (1) off of ball head (3) on rear door | When working on unsecured front door ensure that it does not swing completely open. Otherwise the rear door can be damaged. |
|
| Figure | |||
| 3 | Press door holder (1) off of ball head bolt (3) on B-pillar | Figure | |
| 4 | Moisten grommet (4) and front part of door holder (1) with liquid lubricant | Lubricant, rubber assembly 1 l | *BR00.45-Z-1010-06A |
| 5 | Turn door holder (1), carefully pull inward through grommet (4) and remove from rear door toward rear | Hold grommet (4) from inside. Otherwise the grommet (4) can be detached from the rear door or damaged. |
|
| Install | |||
| 6 | Moisten grommet (4) and front part of door holder (1) with liquid lubricant | Lubricant, rubber assembly 1 l | *BR00.45-Z-1010-06A |
| 7 | Insert door holder (1) into rear door and carefully press outward through grommet (4) | Hold grommet (4) from outside. Otherwise the grommet (4) can be detached from the rear door or damaged. |
|
| 8 | Press door holder (1) onto ball head bolt (3) on B-pillar | ||
| 9 | Press door holder (1) onto ball head bolt (2) on rear door | ||
| 10 | Install power window on rear door | MODEL 222 with CODE Z07 (Top protection) with CODE Z13 (Left rear power window with special protection) with CODE Z14 (Right rear power window with special protection) |
AR72.12-P-1810LFS |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1010-06A | Lubricant, rubber assembly 1 l | A 000 989 03 67 |