LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> ML63 AMG >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (Interior Equipment - 166 Chassis) >> Testing & Repair >> Remove/Install Spare Tire Well Panel - AR68.30-P-4620GQ

Remove/Install Spare Tire Well Panel - AR68.30-P-4620GQ

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2019 Mercedes-Benz GLE63 S AMG, 2019 Mercedes-Benz GLE63 AMG, 2019 Mercedes-Benz GLE43 AMG, 2019 Mercedes-Benz GLE400, and 2018 Mercedes-Benz GLE63 S AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 166 

Shown on model 166.024 with code 690 (emergency spare tire), without code 489 (AIRMATIC (air suspension with level adjustment and adaptive damping system, ADS) 

G12080057
REMOVINGINSTALLING Remove/install     
1.1 Remove load compartment floor (2) MODEL 166.0  
1.2 Lift load compartment floor (2) MODEL 166.8  
2 Remove AIRmatic central memory MODEL 166.0 with CODE 489 (Airmatic (air suspension with level adjustment and adaptive damping system ADS)) AR32.22-P-2017GQ
3 Remove spare tire (5) MODEL 166 with CODE 690 (Collapsible spare wheel)  
4 Unscrew bolt (3) and remove cover strip (4) IMPORTANT Model 166.8 unscrew with two bolts (3).  
5 Remove vehicle tool kit shaped part (6)    
6 Pry out clips (7) from spare wheel well paneling (1)    
7 Remove spare tire well trim (1) INSTALLATION IMPORTANT : Ensure that spare wheel well (1) is routed correctly.  
8 Install in the reverse order