Notes On The Evaluating And Interpreting Brake Tests On Test Stands - AH42.00-P-0004-01A

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2019 Mercedes-Benz GLE63 S AMG, 2019 Mercedes-Benz GLE63 AMG, 2019 Mercedes-Benz GLE43 AMG, 2019 Mercedes-Benz GLE400, and 2018 Mercedes-Benz GLE63 S AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL ALL

General information on assessment of brake testing on passenger car test stands

The brake system assessment is based on the values determined on the roller brake test stand.

Brake test scopes on test stands for passenger cars

Are the minimum brake values for the service and parking brakes reached?
Are the brake values for the service brake within the maximum deviation from right to left?
Are the brake values for the parking brake (mechanical or electromechanical) within the maximum deviation from right to left?
Is the actuating travel for the service and parking brake (mechanical) within the maximum specification?

Evaluation of brake tests on passenger car test stands

In accordance with the country-specific legislation and Mercedes-Benz specifications, the specified minimum requirements and tolerance limits for the brake system must be fulfilled on a vehicle-specific basis.

If the specified minimum requirements and tolerance limits for the brake system scopes to be tested are not complied with, this must be rejected and rectified subject to separate repair order after a conducted diagnosis and the corresponding findings.

For the Federal Republic of Germany, 29 StVZO (German vehicle licensing regulations) or the 96/96/EG, 09/2010/EG Directive applies with regard to the legal minimum requirement for the brake system.