Remove/install left or right rear axle speed sensor - AR42.40-P-0820EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 207, 212, 218
| Remove/install | |||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| 1 | Remove rear wheel | Model 207 | AP40.10-P-4050CW |
| Model 212, 218 | AP40.10-P-4050EW | ||
| 2 | Remove fender liner (1) from rear fender | ||
| 3 | Disconnect electrical connector (2) from left rear axle rpm sensor (L6/3) and right rear axle rpm sensor (L6/4) | ||
| 4 | Unclip electrical feed line of left rear axle rpm sensor (L6/3) and right rear axle rpm sensor (L6/4) from line bracket (3) and guide rail (4) | ||
| 5 | Remove bolt (5) and pull left rear axle rpm sensor (L6/3) and right rear axle rpm sensor (L6/4) with line bracket (3) out of wheel carrier (6) | ||
| 6 | Install in the reverse order | ||
| 7 | Read out and erase fault memory | AD00.00-P-2000-04A |