Risk of accident caused by vehicle starting off on its own when jacked up. Risk of injury caused by rotating parts when working on running engine or drive train. - AS00.00-Z-0008-01A

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

Ensure that jack stands are in a safe condition. An authorized person must occupy the driver's seat. Wear closed and close-fitting work clothes. Do not touch hot or rotating parts.

Model 117, 156, 164, 166, 169, 171, 172, 176, 203, 205, 209, 219, 242, 245, 246, 251, 292, 415, 613, 671, 900, 906, 909

Potential risks

Risk of accident

Caused by vehicle driving off on its own when under operation (e.g. during measurements) with engine running and gear engaged. Danger caused by vehicle slipping off the jack stands.

Risk of injury

Severe injuries can be caused by rotating parts in the area of the running engine and drivetrain.

Because the engine heats up when operating, serious burns can be caused by touching individual unshielded parts.

Safety instructions/precautions

The hazard area of the vehicle may only be entered by persons required to conduct the work.
To perform the work, climb into cab.
Lift the vehicle high enough that the wheels do not touch the ground when operated.
The person sitting in the driver seat must be familiar with the operation of the vehicle and be able to initiate appropriate measures.
When setting up the jack stands, make sure they are positioned on solid ground and that they are standing steadily.
The vehicle must be securely positioned on the surfaces; place a non-slip base on the surface if necessary.
Wear closed and close-fitting work clothes.
Remove all jewelry such as chains, rings, etc.
Wear suitable head wear to cover long hair.
Before commencing any work on the running engine, familiarize yourself with the location of potentially hot parts.
When carrying out work when the engine is running do not touch any hot and rotating parts .

First aid measures in the event of burns

Rinse the skin areas affected with plenty of cold water and cover skin with sterile burn dressings. Do not apply the dressings tightly, but rather loosely over the affected area of skin. Do not use any fraying dressings (e.g. absorbent gauze). Do not rub the affected areas of skin.
Consult a physician immediately.