Retrofit Mercedes-Benz InCar Internet - AZ82.85-P-0005CYA

MODEL 204.9 up to 7/30/12 up to model year 2013 with CODE 512 (COMAND APS with DVD changer) with CODE 527 (COMAND APS with single DVD drive (with navigation)) without CODE 830 (China version) 

Routing diagram without code (518) Media interface 

Fig 1: Routing Diagram Without Code (518) Media Interface

Courtesy of MERCEDES-BENZ USA

Routing diagram with code (518) Media interface 

Fig 2: Routing Diagram With Code (518) Media Interface

Courtesy of MERCEDES-BENZ USA

	Remove
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Move front passenger seat toward rear
2	Remove glove box
			AR68.10-P-1200CY
3	Remove COMAND controller unit (A40/3)
			AR82.60-P-7502CW
4	Remove Audio/COMAND display (A408)
			AR82.60-P-7722CY
	Install
5	Retrofit InCar Internet adapter wiring harness		AZ82.85-P-0005-02CYA
6	Retrofit low voltage differential signal (LVDS) head unit wiring harness and LVDS display wiring harness		AZ82.85-P-0004-03CYB
7	Retrofit InCar Internet connecting cable (2) and InCar Internet adapter line (20)		AZ82.85-P-0005-05CYA
		Rechargeable screwdriver, rechargeable drill
8	Retrofit InCar Internet control unit (1)		AZ82.85-P-0005-04CYA
9	Install remaining parts
10	Document retrofitted equipment via vehicle documentation (VeDoc)	Attach note "Mercedes-Benz InCar Internet retrofitted as per AZ82.85-P-0005CYA " under field organization texts to design group 82.
11	Connect Star Diagnosis and select vehicle via the vehicle identification number (VIN)
			AD00.00-P-2000-04A
12	Perform initial startup for InCar Internet with XENTRY	For the initial startup, model series 204 must be entered in the "ICI variant coding" menu item in XENTRY.
13	Disconnect STAR DIAGNOSIS
			AD00.00-P-2000-04A
14	Perform function check of InCar Internet