Notes on installing rear wall between passenger compartment and trunk - AH64.20-P-1060-01V

WARNING: This page does not describe the selected car, but rather 200 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz GLA250, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 171, 172

Rear panel between passenger compartment and trunk, shown on model 171

Fig 1: Locating Rear Panel Between Passenger Compartment And Trunk (Shown On Model 171)

Courtesy of MERCEDES-BENZ USA

Section (A-A) rear panel between passenger compartment and trunk, shown on model 171

Fig 2: Identifying Rear Panel Clearance (Shown On Model 171)

Courtesy of MERCEDES-BENZ USA

When installing rear panel (2) use only original screws M6X12 (3) due to spacing (a).

The tank (1) can be damaged if bolts with a shank length longer than 12 mm are used.