Remove/install sound generator control valve - AR09.41-P-0123MTA
ENGINE 133 in MODEL 117, 156, 176 with CODE U21 (AMG Performance exhaust system)
| Remove/install | |||
| 1 | Remove SOGE (3) | AR09.41-P-0122MTA | |
| 2 | Detach FIR sound line from line (7) | ||
| 3 | Disconnect electrical connection (1) from SOGE control valve (2) | ||
| 4 | Remove screw/bolts (4) and remove SOGE control valve (2) with bracket (5) and lines (6, 7) | *BA09.41-P-1008-01T | |
| 5 | Detach SOGE control valve (2) from bracket (5) | Only if SOGE control valve (2) is replaced. | |
| 6 | Detach lines (6, 7) from SOGE control valve (2) | Only if SOGE control valve (2) is replaced. | |
| Check | |||
| 7 | Check elastomer bearing from bracket (5) for damage and replace if necessary | ||
| 8 | Install in the reverse order |
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 133 | |
|---|---|---|---|
| BA09.41-P-1008-01T | Bolt, sound generator control valve to crankcase/charge air cooler | Nm | 8 |