Remove/install front pre-fuse box - AR54.15-P-1330NKB

MODEL 117, 156, 176, 242, 246 

Shown on MODEL 246 

Fig 1: Front Pre-Fuse Box Component Location - Model 156 (Shown On Model 246)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove battery tray		AR54.00-P-0002NKB
2	Remove covers (1, 2)
3	Unclip bracket (3) and expose electrical wiring harness
4	Unscrew nut (4)	Nut, positive line to fuse and relay module in engine compartment	*BA54.15-P-1002-01I
5	Unscrew nuts (5, 7) and remove electrical lines	The electrical lines are structurally coded.
		Nut, positive line to pre-fuse box	*BA54.15-P-1001-01I
6	Unclip front pre-fuse box (F32) using a suitable screwdriver (arrow)
7	Pull front pre-fuse box (F32) out of guide until nut (6) is accessible
8	Unscrew nut (6) and remove electrical line	Nut, positive line to pre-fuse box	*BA54.15-P-1001-01I
9	Remove front pre-fuse box (F32) from guide
10	Disconnect electrical connector (8)
11	Expose electric wiring harness (9)	Ensure that the electrical wiring harness (9) is correctly routed.
12	Remove front pre-fuse box (F32)
13	Install in the reverse order

FUSE AND RELAY BOX

Number	Designation			MODEL 117	MODEL 156
BA54.15-P-1001-01I	Nut, positive line to pre-fuse box	M6	Nm	8	8
		M8	Nm	16	16

FUSE AND RELAY BOX

Number	Designation			MODEL 176	MODEL 242
BA54.15-P-1001-01I	Nut, positive line to pre-fuse box	M6	Nm	8	8
		M8	Nm	16	16

FUSE AND RELAY BOX

Number	Designation			Model 246
BA54.15-P-1001-01I	Nut, positive line to pre-fuse box	M6	Nm	8
		M8	Nm	16

FUSE AND RELAY BOX

Number	Designation			MODEL 117	MODEL 156
BA54.15-P-1002-01I	Nut, positive line to fuse and relay module in engine compartment	M8	Nm	16	16

FUSE AND RELAY BOX

Number	Designation			MODEL 176	MODEL 242
BA54.15-P-1002-01I	Nut, positive line to fuse and relay module in engine compartment	M8	Nm	16	16

FUSE AND RELAY BOX

Number	Designation			Model 246
BA54.15-P-1002-01I	Nut, positive line to fuse and relay module in engine compartment	M8	Nm	16