Replace front axle carrier bearing - AR33.10-P-0040GQ

MODEL 166 

	Remove/install
1	Lower front axle		AR33.10-P-0101GQ
2	Remove bearing from front axle carrier	Replacing individual  bearings is permissible.	AR33.10-P-0040-01GZ
			Fig 2
			Fig 1
			Fig 3
			Fig 5
			Fig 4
		Antifriction agent	*BR00.45-Z-1010-06A
3	Install in the reverse order
	Measure
4	Perform wheel alignment check		AR40.20-P-0200GQ
	Checking
5	Inspect headlamp adjustment, correct if necessary.		AP82.10-P-8260GZ

Fig 1: Identifying Hand Pump (652 589 00 33 21)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Hollow Cylinder (652 589 00 33 22)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Hydraulic Hose (652 589 00 33 23)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Worm Shaft (652 589 00 33 11)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Extraction And Insertion Tool (164 589 01 43 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-06A	Antifriction agent	A 000 989 03 67