Rear axle torsion bar - BA32.20-P-1000-04S
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 205
REAR AXLE TORSION BAR
| Number | Designation | MODEL 205 except CODE 488/489/492 | MODEL 205 with CODE 489, except CODE 488/492 | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04S | Bolt, torsion bar linkage to torsion bar | Nm | 50 | 50 | |
| BA32.20-P-1002-04S | Nut, stabilizer bar to rear axle carrier | Nm | 80 | 80 | |
| BA32.20-P-1003-04S | Nut, torsion bar linkage to spring control arm | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 180 | 360 | ||
| BA32.20-P-1004-04S | Bolt, torsion bar linkage to steering knuckle | Nm | - | - | |
REAR AXLE TORSION BAR
| Number | Designation | MODEL 205 with CODE 488 or with CODE 492 | ||
|---|---|---|---|---|
| BA32.20-P-1001-04S | Bolt, torsion bar linkage to torsion bar | Nm | 50 | |
| BA32.20-P-1002-04S | Nut, stabilizer bar to rear axle carrier | Nm | 80 | |
| BA32.20-P-1003-04S | Nut, torsion bar linkage to spring control arm | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||
| BA32.20-P-1004-04S | Bolt, torsion bar linkage to steering knuckle | Nm | 50 | |