Remove/Install Parktronic System (PTS) Warning Display In Dashboard - AR54.65-P-0003GZ

MODEL 164, 166 with CODE (220) Parktronic system (PTS)

Shown on model 164.1

Fig 1: Identifying Parktronic System Warning Display Remove/Install Components - Shown On Model 164.1

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge	All models	AH54.00-P-0001-01A
1	Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit	KEYLESS-GO start/stop button only on vehicles with code (889) Keyless-Go.
2	Carefully lever PTS warning indicator (driver side dashboard) (A44/1) upwards out of center cockpit speaker (centerfill) cover (2)	Protect the dashboard from scratches. Install the driver-side dashboard PTS warning indicator (A44/1) such that the LED indicators (arrows) face the interior.
2			Figure
3	Disconnect electrical connector (1)
4	Install in the reverse order

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA