Remove/Install Fuse And Relay Box In Rear - AR54.15-P-1261GQ

MODEL 166 

MODIFICATION NOTES

10.11.11

Fold right rear seat cushion forward and fold back floor covering, added

Operation step 2

Fig 1: Identifying Fuse And Relay Box Remove/Install Components - Shown On Model 166.024

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Fuse And Relay Box Remove/Install Components - Shown On Model 166.873

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Detach ground line from battery		AR54.10-P-0003GZ
	Notes on battery		AH54.10-P-0001-01A
2.1	Fold right rear seat cushion forward and fold back floor covering	MODEL 166.0
2.2	Fold left rear seat forward	MODEL 166.8
3	Remove cover (2) from housing (4)
4	Unclip electrical feed line (6) from rear seat cushion	If necessary
5	Detach electrical feed lines (3) from rear fuse box (F4)
6	Unclip rear fuse box (F4) from housing (4) and remove	Clips (5) must latch audibly into housing (4).
7	Release and disconnect electrical feed lines (8) on rear fuse box (F4)	Replace cable tie.
8	Detach electrical connections (7) from rear fuse box (F4) and remove rear fuse box (F4)	Number of electrical connections (7) and fuse assignment varies depending on vehicle model and equipment.
9	Install in the reverse order