Notes on installation position and suspension of rear muffler - AH49.10-P-1000-02B

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 104 in MODEL 210.055 with CODE 957 (AMG engineering package)

ENGINE 119 in MODEL 210.072 with CODE 957 (AMG engineering package)

The rubber mounts on the rear center muffler (arrow) and on the rear muffler (arrows) have a higher shore hardness.

Fig 1: Locating Rubber Mounts On Rear Center Muffler

Courtesy of MERCEDES-BENZ USA

In the event of an unfavorable tolerance position, the rear muffler suspension points must be aligned accordingly during assembly (arrows).

Fig 2: Locating Rear Muffler Suspension Points

Courtesy of MERCEDES-BENZ USA

When working on the exhaust system make sure that the tail pipes are parallel to the AMG bumper and at a distance of min. 15 mm to it.

Fig 3: Identifying Tail Pipes Parallel To AMG Bumper Distance

Courtesy of MERCEDES-BENZ USA