Notes on Active Body Control suspension - AH32.50-P-0001-01LF
WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2019 Mercedes-Benz SLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 217 with CODE 487 (MAGIC BODY CONTROL)
MODEL 222 with CODE 487 (Active Body Control (ABC))
MODEL 231.### ## as of 021274 with CODE 487 (Active Body Control (ABC))
Shown on MODEL 222
- Clean the area around connection fittings and hose connections properly before start of repair.
- Always close off open connection fittings and hose connections in order to prevent dirt particles entering the system.
- Ensure absolute cleanliness when pouring in the hydraulic fluid.
- When bleeding air from the ABC system, and whenever allowing the pump motor to run, always ensure that the hydraulic fluid reservoir (5) contains an adequate supply of hydraulic fluid. The hydraulic pump (3) must never draw in air.
- Do not use the funnel with filter that is used for filling in hydraulic fluid for other operating fluids. Store the funnel with filter in a separate cabinet.
- Always move the steering to the straight-ahead position if the vehicle is to remain unused for a long period of time.