General notes on working on vehicles with level control/ADS - AH32.00-P-0002-01A
WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2019 Mercedes-Benz SLC300. However, it is still accessible from the selected car via links, so may be relevant.
ALL MODELS WITH CODE 216B, 216C, 217A, 480
The following instructions should be followed when disconnecting and connecting pressure lines:
Clean contaminated line connections before disconnecting them. Seal disconnected lines and hoses and connections to components immediately with blind plugs.
Only use open box wrench and special tool when loosening and tightening pressure lines to avoid damage to the line connections.
Check the component concerned and line connections for leaks after assembly work on the suspension system.