Notes on installing camshaft bearing bridge - AH05.20-P-2000-01BV
WARNING: This page does not describe the selected car, but rather 196 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 113.960
Pay attention to the following notes before installing the camshaft bearing bridges:
Lubricate camshaft bearings.
- Camshafts must not be replaced individually for tolerance reasons.
- If the camshaft bearing bridge is damaged, replace the cylinder head complete with the camshaft bearing bridge.
- The bolts M 7x84, 7x90 and 7x120 must always be replaced.
- The bolts M 7x84, 7x90 and 7x120 may not be reused.
- Pay attention to tightening torque, loosening procedure and tightening procedure of the bolts.