Notes on installing camshaft bearing bridge - AH05.20-P-2000-01AV
WARNING: This page does not describe the selected car, but rather 196 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 113.982
ENGINE 113.993
ENGINE 113.960
ENGINE 112.976
ENGINE 113 (except 113.960)
ENGINE 112
ENGINE 113.962
ENGINE 112.951
Pay attention to the following notes before installing the camshaft bearing bridges:
Lubricate the camshaft bearings.
- If the camshaft bearing bridge is damaged, replace the cylinder head complete with the camshaft bearing bridge.
- The bolts M7 X84 may not be reused, they must always be replaced.
- Note torque, loosening procedure and tightening procedure for bolts M7 X84.