Marking on camshaft bearing caps - AH05.20-P-6992-04HD
WARNING: This page does not describe the selected car, but rather 196 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 613, 648
Camshaft bearing caps are marked as follows:
On the left exhaust camshaft starting from the front with E1 to E7.
On the right exhaust camshaft starting from the front with A1 to A7.
The camshaft bearing caps must be installed in the same position again.
Otherwise dimensional accuracy will not be ensured.