Marking of camshaft bearing caps - AH05.20-P-6992-01GF
WARNING: This page does not describe the selected car, but rather 196 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 166
When installing camshaft bearing caps observe the consecutive numbering and install the camshaft bearing cap with consecutive numbering facing the intake side at the same position again.
Otherwise the dimensional accuracy will not be given.
The camshaft bearing caps are consecutively numbered, starting on the front camshaft (camshaft sprocket).
The numbers are stamped into the camshaft bearing caps using number punches.