Loosening and tightening regulation for camshaft bearing caps - AH05.20-P-0300-01ORA
WARNING: This page does not describe the selected car, but rather 196 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 607
Loosening and tightening specification
Tighten screws/bolts (1 to 12) step by step in specified sequence.
Loosening the screws/bolts (1 to 12) takes place in reverse order.
When doing this, the bearing caps must not be tilted.