Loosening and tightening regulation for camshaft bearing caps - AH05.20-P-0300-01A
WARNING: This page does not describe the selected car, but rather 196 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 275, 277, 279, 285
Left cylinder head
Left cylinder head tightening specification
Bolts must be tightened gradually in the numeric sequence.
When doing this, the bearing caps must not be tilted.
Left cylinder head release specifications
Bolts are unfastened in the reverse numeric sequence.
Right cylinder head
Right cylinder tightening specifications
Bolts must be tightened gradually in the numeric sequence.
When doing this, the bearing caps must not be tilted.
Right cylinder head release specifications
Bolts are to be unfastened in the reverse numeric sequence.