Information on application of sealant to bottom part of camshaft housing - AH05.20-P-6995-01QK
WARNING: This page does not describe the selected car, but rather 196 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 271.951 in MODEL 906
ENGINE 271
The sealing surfaces must be free of oil and dirt. The sealant may only be applied to the specified surfaces in the form of a bead with height and width of 2.0 mm (±0.5 mm). The sealant must be applied within 10 min. The bead should not be spread.
Only the approved sealant may be used.
The lines (A) identify the application of the sealant.