LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> GL350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Timing - General Information) >> General Information >> General notes on timing, markings - AH05.10-P-1000-01A

General notes on timing, markings - AH05.10-P-1000-01A

WARNING: This page does not describe the selected car, but rather 196 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz SL63 AMG, and 2019 Mercedes-Benz SL550. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 112/951/976, 113 

IMPORTANT

Shown on engine 112 

Fig 1: Identifying Marking On Balancer Shaft Gear Of Engine - Shown On Engine 112
G10037395Courtesy of MERCEDES-BENZ USA

IMPORTANT The four copper lugs (1) of the timing chain make it easier to mount the timing chain. Each copper lug (1) must line up with one of the markings.

IMPORTANT Paths of unequal-lengths for the timing chain mean that the engine has to be cranked up to 14 times before the copper lugs (1) line up with the markings.