Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06TI
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 642 in MODEL 211.020/022/084/089/220/222/284/289
Sealing compound application at end cover
The traced line (A) identifies the sealant run.
Sealing surfaces must be free of oil and grease. Apply sealant to surfaces as a bead 1.5 mm (±0.5 mm) wide. The sealant must be applied within 10 min. The sealant bead must not be spread.