Information on application of sealant to end cover of crankcase - AH01.40-P-1000-04B
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 628.960 in MODEL 220.028/128
ENGINE 628.961 in MODEL 211.028
ENGINE 628.962 in MODEL 463.309/332/333
Install cover within 10 min. after applying sealant.
Do not spread sealing bead. Use only the sealant listed in the repair instructions.
Clean sealing surfaces, apply sealant to marked line (G) with bead thickness of 2.0 mm (±0.5mm).