Electric sliding roof - BA77.20-P-1000-01C
WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz GLA250, and 2019 Mercedes-Benz SLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 163
ELECTRIC SLIDING ROOF
| Number | Designation | MODEL 163 | ||
|---|---|---|---|---|
| BA77.20-P-1001-01C | Bolt to lamella roof drive | Nm | 4 | |
| BA77.20-P-1002-01C | Bolt to lamella roof frame | Nm | 10 | |
| BA77.20-P-1003-01C | Bolt, to mounting rail (1st lamella) | Nm | 1, 5 | |
| BA77.20-P-1004-01C | Bolt, to bearing at top | Nm | 4 | |
| BA77.20-P-1005-01C | Bolt to cover plate (guide tube) | M 3.5 | Nm | 4 |
| M 5 | Nm | 1, 5 | ||
| BA77.20-P-1006-01C | Bolt to bearing for rotary slider | Nm | 4 | |
| BA77.20-P-1007-01C | Bolt to reinforcement plate | Nm | 3 | |
| BA77.20-P-1008-01C | Bolt, sliding roof drive to tilting/sliding roof frame | Torx | Nm | 4 |
| Hexagon socket | Nm | 4 | ||
| BA77.20-P-1009-01C | Bolt, tilting/sliding roof frame on roof paneling | Nm | 8 | |
| BA77.20-P-1010-01C | Bolt, tilting/sliding roof panel to tilt angle bracket | Nm | 4 | |