Cross member and front reinforcement - BA62.30-P-1000-01E
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 164, 251
CROSSMEMBER AND FRONT REINFORCEMENT
| Number | Designation | MODEL 164 | MODEL 251 | ||
|---|---|---|---|---|---|
| BA62.30-P-1001-01E | Bolt, right bracket to engine crossmember | M10 | Nm | 45 | 45 |
| BA62.30-P-1002-01E | Bolt, right bracket to transmission tunnel | M10 | Nm | 45 | 45 |
| BA62.30-P-1003-01E | Bolt, left bracket to engine crossmember | M10 | Nm | 45 | 45 |
| BA62.30-P-1004-01E | Bolt, left bracket to transmission tunnel | M10 | Nm | 45 | 45 |
| BA62.30-P-1005-01E | Bolt, left reinforcement bracket to body | Nm | - | 45 | |
| BA62.30-P-1006-01E | Bolt, left reinforcement bracket to transmission bracket | Nm | - | 45 | |
| BA62.30-P-1007-01E | Bolt, partition wall between wheel well liners to wheel well liners | Nm | - | 23 | |
| BA62.30-P-1008-01E | Bolt, partition wall reinforcement between wheel well liners to fender | Nm | - | 10 | |