Frame floor - BA61.10-P-1000-01L
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 205
FRAME FLOOR ASSEMBLY
| Number | Designation | MODEL 205 | ||
|---|---|---|---|---|
| BA61.10-P-1001-01L | Rear crossmember to body | Nm | 70 | |
| BA61.10-P-1002-01L | Screw/bolt, front reinforcement on frame floor assembly | Nm | 30 | |
| BA61.10-P-1003-01L | Screw/bolt, center reinforcement to frame floor assembly | Nm | 23 | |
| BA61.10-P-1004-01L | Screw/bolt, rear reinforcement to frame floor assembly | Nm | 23 | |
| BA61.10-P-1005-01L | Screw/bolt, reinforcement under seat to frame floor assembly | Stage 1 | Nm | 30 |
| Loosen stage 2 | ∠° | 180 | ||
| Stage 3 | Nm | 30 | ||
| BA61.10-P-1006-01L | Screw/bolt, front diagonal strut to front axle carrier/stabilizer bar mount shell | Nm | 50 | |
| BA61.10-P-1007-01L | Screw/bolt, front diagonal strut to longitudinal member | Nm | 50 | |