Exhaust system - BA49.10-P-1000-02D
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 157, 276, 278, 279 in MODEL 217
MODIFICATION NOTES
| 11.9.14 | Value changed: Stud bolt, front exhaust system to turbocharger | ENGINE 278 in MODEL 217 |
EXHAUST SYSTEM
| Number | Designation | ENGINE 157 in MODEL 217 | ENGINE 276 in MODEL 217 | |||
|---|---|---|---|---|---|---|
| BA49.10-P-1001-02D | Screw/bolt, front exhaust system to exhaust line | Nm | 20 | 20 | ||
| BA49.10-P-1002-02D | Screw/bolt to front exhaust system bracket | Nm | 20 | 20 | ||
| BA49.10-P-1003-02D | Screw/bolt, front exhaust system bracket to transmission | Stage 1 | Nm | 20 | 20 | |
| Stage 2 | ∠° | - | - | |||
| BA49.10-P-1004-02D | Nut, connection of bracket for elastomer bearing for front exhaust system | Nm | 20 | 20 | ||
| BA49.10-P-1005-02D | Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support | Nm | 20 | 20 | ||
| BA49.10-P-1006-02D | Screw/bolt, clamp for front/center/rear exhaust system | Nm | 35 | 35 | ||
| BA49.10-P-1007-02D | Screw/bolt, bracket for exhaust system elastomer bearing to rear axle carrier | Nm | 20 | 20 | ||
| BA49.10-P-1008-02D | Screw/bolt, bracket for exhaust system elastomer bearing to rear crossmember | Nm | 20 | 20 | ||
| BA49.10-P-1009-02D | Stud bolt, front exhaust system to turbocharger | Nm | 15 | - | ||
| BA49.10-P-1010-02D | Bolt/nut, front exhaust system to turbocharger | Nm | 25 | - | ||
| BA49.10-P-1011-02D | Screw/bolt, bracket to left front exhaust system | Stage 1 | Nm | 14 | - | |
| Stage 2 | Release turns | 3, 6 | - | |||
| BA49.10-P-1012-02D | Screw/bolt, front exhaust system bracket to transmission and crankcase | Nm | 38 | 38 | ||
EXHAUST SYSTEM
| Number | Designation | ENGINE 278 in MODEL 217 | ENGINE 279 in MODEL 217 | |||
|---|---|---|---|---|---|---|
| BA49.10-P-1001-02D | Screw/bolt, front exhaust system to exhaust line | Nm | 20 | - | ||
| BA49.10-P-1002-02D | Screw/bolt to front exhaust system bracket | Nm | 20 | - | ||
| BA49.10-P-1003-02D | Screw/bolt, front exhaust system bracket to transmission | Stage 1 | Nm | 20 | 10 | |
| Stage 2 | ∠° | - | 90 | |||
| BA49.10-P-1004-02D | Nut, connection of bracket for elastomer bearing for front exhaust system | Nm | 20 | 20 | ||
| BA49.10-P-1005-02D | Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support | Nm | 20 | 20 | ||
| BA49.10-P-1006-02D | Screw/bolt, clamp for front/center/rear exhaust system | Nm | 35 | 35 | ||
| BA49.10-P-1007-02D | Screw/bolt, bracket for exhaust system elastomer bearing to rear axle carrier | Nm | 20 | 20 | ||
| BA49.10-P-1008-02D | Screw/bolt, bracket for exhaust system elastomer bearing to rear crossmember | Nm | 20 | 20 | ||
| BA49.10-P-1009-02D | Stud bolt, front exhaust system to turbocharger | Nm | 15 | - | ||
| BA49.10-P-1010-02D | Bolt/nut, front exhaust system to turbocharger | Nm | 25 | 25 | ||
| BA49.10-P-1011-02D | Screw/bolt, bracket to left front exhaust system | Stage 1 | Nm | 14 | - | |
| Stage 2 | Release turns | 3, 6 | - | |||
| BA49.10-P-1012-02D | Screw/bolt, front exhaust system bracket to transmission and crankcase | Nm | 38 | 38 | ||