Exhaust system - BA49.10-P-1000-01Z
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 156, 157, 272, 273, 275, 276, 278 in MODEL 221
ENGINE 156, 157, 273, 275, 278 in MODEL 216
EXHAUST SYSTEM
| Number | Designation | ENGINE 156 in MODEL 216 | ENGINE 156 in MODEL 221 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-01Z | Screw/bolt, catalytic converter to exhaust manifold | Nm | 25 | 25 | |
| BA49.10-P-1002-01Z | Nut, Torc clamp for center muffler to catalytic converter | Nm | 55 | 55 | |
| BA49.10-P-1003-01Z | Bolt, rear muffler hose clamp to catalytic converter | Nm | 35 | 35 | |
| BA49.10-P-1004-01Z | Bolt, hose clamp of rear muffler to center muffler | Nm | 35 | 35 | |
| BA49.10-P-1005-01Z | Nut, muffler brace to rear muffler | Nm | 25 | 25 | |
| BA49.10-P-1006-01Z | Bolt, rubber mount bracket to frame floor | Nm | 20 | 20 | |
| BA49.10-P-1007-01Z | Nut connecting catalytic converter bracket to catalytic converter | Nm | 11 | 11 | |
| BA49.10-P-1008-01Z | Bolt, catalytic converter bracket to transmission | Nm | 20 | 20 | |
| BA49.10-P-1009-01Z | Bolt, exhaust rubber mount to rear axle carrier | Nm | 20 | 20 | |
| BA49.10-P-1010-01Z | Bolt connecting catalytic converter clamp to exhaust gas turbocharger | Nm | - | - | |
| BA49.10-P-1011-01Z | Bolt, catalytic converter bracket to top bracket/transmission housing | Nm | 20 | 20 | |
| BA49.10-P-1012-01Z | Nut connecting Torca clamp of right catalytic converter to left catalytic converter | Nm | - | - | |
| BA49.10-P-1013-01Z | Bolt connecting center muffler hose clamp to catalytic converter | Nm | - | - | |
| BA49.10-P-1014-01Z | Bolt, tail piece of exhaust pipe to rear muffler | Nm | - | - | |
| BA49.10-P-1015-01Z | Nut, bracket for lifting ring to reinforcement | Nm | - | - | |
| BA49.10-P-1016-01Z | Bolt, vibration damper to exhaust system | M8 | Nm | - | - |
EXHAUST SYSTEM
| Number | Designation | ENGINE 157 in MODEL 216, 221 | ENGINE 272 in MODEL 221 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-01Z | Screw/bolt, catalytic converter to exhaust manifold | Nm | 25 | 25 | |
| BA49.10-P-1002-01Z | Nut, Torca clamp for center muffler to catalytic converter | Nm | 55 | 55 | |
| BA49.10-P-1003-01Z | Bolt, rear muffler hose clamp to catalytic converter | Nm | 35 | 35 | |
| BA49.10-P-1004-01Z | Bolt, hose clamp of rear muffler to center muffler | Nm | - | 35 | |
| BA49.10-P-1005-01Z | Nut, muffler brace to rear muffler | Nm | 25 | 25 | |
| BA49.10-P-1006-01Z | Bolt, rubber mount bracket to frame floor | Nm | 20 | 20 | |
| BA49.10-P-1007-01Z | Nut connecting catalytic converter bracket to catalytic converter | Nm | 11 | 11 | |
| BA49.10-P-1008-01Z | Bolt, catalytic converter bracket to transmission | Nm | 27 | 20 | |
| BA49.10-P-1009-01Z | Bolt, exhaust rubber mount to rear axle carrier | Nm | 20 | 20 | |
| BA49.10-P-1010-01Z | Bolt connecting catalytic converter clamp to exhaust gas turbocharger | Nm | - | - | |
| BA49.10-P-1011-01Z | Bolt, catalytic converter bracket to top bracket/transmission housing | Nm | 20 | - | |
| BA49.10-P-1012-01Z | Nut connecting Torca clamp of right catalytic converter to left catalytic converter | Nm | - | - | |
| BA49.10-P-1013-01Z | Bolt connecting center muffler hose clamp to catalytic converter | Nm | - | - | |
| BA49.10-P-1014-01Z | Bolt, tail piece of exhaust pipe to rear muffler | Nm | - | - | |
| BA49.10-P-1015-01Z | Nut, bracket for lifting ring to reinforcement | Nm | 20 | - | |
| BA49.10-P-1016-01Z | Bolt, vibration damper to exhaust system | M8 | Nm | - | - |
EXHAUST SYSTEM
| Number | Designation | ENGINE 273 in MODEL 216 | ENGINE 273 in MODEL 221 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-01Z | Screw/bolt, catalytic converter to exhaust manifold | Nm | 25 | 25 | |
| BA49.10-P-1002-01Z | Nut, Torca clamp for center muffler to catalytic converter | Nm | 55 | 55 | |
| BA49.10-P-1003-01Z | Bolt, rear muffler hose clamp to catalytic converter | Nm | 35 | 35 | |
| BA49.10-P-1004-01Z | Bolt, hose clamp of rear muffler to center muffler | Nm | 35 | 35 | |
| BA49.10-P-1005-01Z | Nut, muffler brace to rear muffler | Nm | 25 | 25 | |
| BA49.10-P-1006-01Z | Bolt, rubber mount bracket to frame floor | Nm | 20 | 20 | |
| BA49.10-P-1007-01Z | Nut connecting catalytic converter bracket to catalytic converter | Nm | 11 | 11 | |
| BA49.10-P-1008-01Z | Bolt, catalytic converter bracket to transmission | Nm | 20 | 20 | |
| BA49.10-P-1009-01Z | Bolt, exhaust rubber mount to rear axle carrier | Nm | 20 | 20 | |
| BA49.10-P-1010-01Z | Bolt connecting catalytic converter clamp to exhaust gas turbocharger | Nm | - | - | |
| BA49.10-P-1011-01Z | Bolt, catalytic converter bracket to top bracket/transmission housing | Nm | - | - | |
| BA49.10-P-1012-01Z | Nut connecting Torca clamp of right catalytic converter to left catalytic converter | Nm | - | - | |
| BA49.10-P-1013-01Z | Bolt connecting center muffler hose clamp to catalytic converter | Nm | - | - | |
| BA49.10-P-1014-01Z | Bolt, tail piece of exhaust pipe to rear muffler | Nm | 8 | - | |
| BA49.10-P-1015-01Z | Nut, bracket for lifting ring to reinforcement | Nm | - | - | |
| BA49.10-P-1016-01Z | Bolt, vibration damper to exhaust system | M8 | Nm | - | - |
EXHAUST SYSTEM
| Number | Designation | ENGINE 275 in MODEL 216 | ENGINE 275 in MODEL 221 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-01Z | Screw/bolt, catalytic converter to exhaust manifold | Nm | - | - | |
| BA49.10-P-1002-01Z | Nut, Torca clamp for center muffler to catalytic converter | Nm | - | - | |
| BA49.10-P-1003-01Z | Bolt, rear muffler hose clamp to catalytic converter | Nm | - | - | |
| BA49.10-P-1004-01Z | Bolt, hose clamp of rear muffler to center muffler | Nm | - | - | |
| BA49.10-P-1005-01Z | Nut, muffler brace to rear muffler | Nm | 25 | 25 | |
| BA49.10-P-1006-01Z | Bolt, rubber mount bracket to frame floor | Nm | 20 | 20 | |
| BA49.10-P-1007-01Z | Nut connecting catalytic converter bracket to catalytic converter | Nm | 11 | 11 | |
| BA49.10-P-1008-01Z | Bolt, catalytic converter bracket to transmission | Nm | 20 | 20 | |
| BA49.10-P-1009-01Z | Bolt, exhaust rubber mount to rear axle carrier | Nm | 20 | 20 | |
| BA49.10-P-1010-01Z | Bolt connecting catalytic converter clamp to exhaust gas turbocharger | Nm | 25 | 25 | |
| BA49.10-P-1011-01Z | Bolt, catalytic converter bracket to top bracket/transmission housing | Nm | 20 | 20 | |
| BA49.10-P-1012-01Z | Nut connecting Torca clamp of right catalytic converter to left catalytic converter | Nm | 55 | 55 | |
| BA49.10-P-1013-01Z | Bolt connecting center muffler hose clamp to catalytic converter | Nm | 35 | 35 | |
| BA49.10-P-1014-01Z | Bolt, tail piece of exhaust pipe to rear muffler | Nm | 8 | 8 | |
| BA49.10-P-1015-01Z | Nut, bracket for lifting ring to reinforcement | Nm | - | - | |
| BA49.10-P-1016-01Z | Bolt, vibration damper to exhaust system | M8 | Nm | - | - |
EXHAUST SYSTEM
| Number | Designation | ENGINE 276 in MODEL 221 | ENGINE 278 in MODEL 216 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-01Z | Screw/bolt, catalytic converter to exhaust manifold | Nm | 25 | 25 | |
| BA49.10-P-1002-01Z | Nut, Torca clamp for center muffler to catalytic converter | Nm | - | 55 | |
| BA49.10-P-1003-01Z | Bolt, rear muffler hose clamp to catalytic converter | Nm | 35 | 35 | |
| BA49.10-P-1004-01Z | Bolt, hose clamp of rear muffler to center muffler | Nm | 35 | - | |
| BA49.10-P-1005-01Z | Nut, muffler brace to rear muffler | Nm | - | - | |
| BA49.10-P-1006-01Z | Bolt, rubber mount bracket to frame floor | Nm | 22 | 22 | |
| BA49.10-P-1007-01Z | Nut connecting catalytic converter bracket to catalytic converter | Nm | - | - | |
| BA49.10-P-1008-01Z | Bolt, catalytic converter bracket to transmission | Nm | - | - | |
| BA49.10-P-1009-01Z | Bolt, exhaust rubber mount to rear axle carrier | Nm | 22 | 22 | |
| BA49.10-P-1010-01Z | Bolt connecting catalytic converter clamp to exhaust gas turbocharger | Nm | - | ||
| BA49.10-P-1011-01Z | Bolt, catalytic converter bracket to top bracket/transmission housing | Nm | 20 | 20 | |
| BA49.10-P-1012-01Z | Nut connecting Torca clamp of right catalytic converter to left catalytic converter | Nm | - | - | |
| BA49.10-P-1013-01Z | Bolt connecting center muffler hose clamp to catalytic converter | Nm | - | - | |
| BA49.10-P-1014-01Z | Bolt, tail piece of exhaust pipe to rear muffler | Nm | - | - | |
| BA49.10-P-1015-01Z | Nut, bracket for lifting ring to reinforcement | Nm | 20 | 20 | |
| BA49.10-P-1016-01Z | Bolt, vibration damper to exhaust system | M8 | Nm | - | 20 |
EXHAUST SYSTEM
| Number | Designation | ENGINE 278 in MODEL 221 | ||
|---|---|---|---|---|
| BA49.10-P-1001-01Z | Screw/bolt, catalytic converter to exhaust manifold | Nm | 25 | |
| BA49.10-P-1002-01Z | Nut, Torca clamp for center muffler to catalytic converter | Nm | 55 | |
| BA49.10-P-1003-01Z | Bolt, rear muffler hose clamp to catalytic converter | Nm | 35 | |
| BA49.10-P-1004-01Z | Bolt, hose clamp of rear muffler to center muffler | Nm | - | |
| BA49.10-P-1005-01Z | Nut, muffler brace to rear muffler | Nm | - | |
| BA49.10-P-1006-01Z | Bolt, rubber mount bracket to frame floor | Nm | 22 | |
| BA49.10-P-1007-01Z | Nut connecting catalytic converter bracket to catalytic converter | Nm | - | |
| BA49.10-P-1008-01Z | Bolt, catalytic converter bracket to transmission | Nm | - | |
| BA49.10-P-1009-01Z | Bolt, exhaust rubber mount to rear axle carrier | Nm | 22 | |
| BA49.10-P-1010-01Z | Bolt connecting catalytic converter clamp to exhaust gas turbocharger | Nm | - | |
| BA49.10-P-1011-01Z | Bolt, catalytic converter bracket to top bracket/transmission housing | Nm | 20 | |
| BA49.10-P-1012-01Z | Nut connecting Torca clamp of right catalytic converter to left catalytic converter | Nm | - | |
| BA49.10-P-1013-01Z | Bolt connecting center muffler hose clamp to catalytic converter | Nm | - | |
| BA49.10-P-1014-01Z | Bolt, tail piece of exhaust pipe to rear muffler | Nm | - | |
| BA49.10-P-1015-01Z | Nut, bracket for lifting ring to reinforcement | Nm | 20 | |
| BA49.10-P-1016-01Z | Bolt, vibration damper to exhaust system | M8 | Nm | 20 |