Exhaust system - BA49.10-P-1000-01K
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 271 in MODEL 171, 203, 209, 211
EXHAUST SYSTEM
| Number | Designation | ENGINE 271 in MODEL 203, 209 | ENGINE 271 in MODEL 211 | |
|---|---|---|---|---|
| BA49.10-P-1001-01K | Bolt of exhaust bracket to transmission | Nm | 20 | - |
| BA49.10-P-1002-01K | Self-locking nut to front exhaust pipe | Nm | 20 | - |
| BA49.10-P-1003-01K | Bolt, flange connection to exhaust pipe/exhaust manifold | Nm | 20 | - |
| BA49.10-P-1004-01K | Nut connecting front exhaust system to bracket | Nm | 20 | 20 |
| BA49.10-P-1005-01K | Bolt connecting bracket for front exhaust system to transmission | Nm | - | 20 |
| BA49.10-P-1006-01K | Bolt connecting front exhaust system to center muffler | Nm | 20 | 20 |
| BA49.10-P-1007-01K | Bolt connecting front exhaust system to firewall catalytic converter | Nm | 20 | 20 |
| BA49.10-P-1008-01K | Nut connecting exhaust rubber mount to frame floor | Nm | 20 | 20 |
| BA49.10-P-1009-01K | TWC exhaust gas temperature sensor to NOX catalytic converter | Nm | - | - |
| BA49.10-P-1010-01K | Bolt connecting exhaust manifold with catalytic converter to bracket | Nm | 20 | 20 |
| BA49.10-P-1011-01K | Bolt, catalytic converter bracket to transmission | Nm | - | 40 |
| BA49.10-P-1012-01K | Bolt connecting underfloor catalytic converter to exhaust manifold with catalytic converter | Nm | - | - |
| BA49.10-P-1013-01K | Bolt for exhaust rubber bearing bracket | Nm | - | - |
| BA49.10-P-1014-01K | Bolt connecting underfloor catalytic converter to pipe connection | Nm | - | - |
| BA49.10-P-1015-01K | Nut connecting rear muffler clamp to pipe connection | Nm | - | - |
| BA49.10-P-1016-01K | Self-locking nut for rear muffler reinforcement | Nm | - | 20 |
| BA49.10-P-1017-01K | Bolt connecting heat shield to exhaust manifold with catalytic converter | Nm | - | - |
| BA49.10-P-1018-01K | Nut of rear muffler clamp to center muffler | Nm | 20 | 20 |
EXHAUST SYSTEM
| Number | Designation | ENGINE 271 in MODEL 171 | |
|---|---|---|---|
| BA49.10-P-1001-01K | Bolt of exhaust bracket to transmission | Nm | - |
| BA49.10-P-1002-01K | Self-locking nut to front exhaust pipe | Nm | - |
| BA49.10-P-1003-01K | Bolt, flange connection to exhaust pipe/exhaust manifold | Nm | - |
| BA49.10-P-1004-01K | Nut connecting front exhaust system to bracket | Nm | 20 |
| BA49.10-P-1005-01K | Bolt connecting bracket for front exhaust system to transmission | Nm | 20 |
| BA49.10-P-1006-01K | Bolt connecting front exhaust system to center muffler | Nm | 20 |
| BA49.10-P-1007-01K | Bolt connecting front exhaust system to firewall catalytic converter | Nm | 20 |
| BA49.10-P-1008-01K | Nut connecting exhaust rubber mount to frame floor | Nm | 20 |
| BA49.10-P-1009-01K | TWC exhaust gas temperature sensor to NOX catalytic converter | Nm | - |
| BA49.10-P-1010-01K | Bolt connecting exhaust manifold with catalytic converter to bracket | Nm | 20 |
| BA49.10-P-1011-01K | Bolt, catalytic converter bracket to transmission | Nm | 40 |
| BA49.10-P-1012-01K | Bolt connecting underfloor catalytic converter to exhaust manifold with catalytic converter | Nm | 20 |
| BA49.10-P-1013-01K | Bolt for exhaust rubber bearing bracket | Nm | 20 |
| BA49.10-P-1014-01K | Bolt connecting underfloor catalytic converter to pipe connection | Nm | 20 |
| BA49.10-P-1015-01K | Nut connecting rear muffler clamp to pipe connection | Nm | 20 |
| BA49.10-P-1016-01K | Self-locking nut for rear muffler reinforcement | Nm | 20 |
| BA49.10-P-1017-01K | Bolt connecting heat shield to exhaust manifold with catalytic converter | Nm | 8 |
| BA49.10-P-1018-01K | Nut of rear muffler clamp to center muffler | Nm | - |