Exhaust system - BA49.10-P-1000-01AN
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 157, 276, 277, 278, 279, 642, 651 in MODEL 222
MODIFICATION NOTES
| 31.3.14 | Value changed: Screw/bolt, bracket for exhaust line/reinforcement to frame floor assembly | ||
| 31.3.14 | Value changed: Screw/bolt, clamp for oxidation catalytic converter | ENGINE 642 in MODEL 222 | |
| 31.3.14 | Value changed: Nut, connection of bracket for elastomer bearing for front exhaust system | ENGINE 642 in MODEL 222 | |
| 31.3.14 | Value changed: Bolt/nut, exhaust system elastomer bearing bracket to rear axle carrier | ENGINE 642 in MODEL 222 | |
| 31.3.14 | Value changed: Screw/bolt, bracket for exhaust system elastomer bearing to rear crossmember | ENGINE 642 in MODEL 222 | |
| 31.3.14 | Value changed: Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support | ENGINE 642 in MODEL 222 | |
| 11.9.14 | Value changed: Screw/bolt, front exhaust system bracket to transmission | ||
| 11.9.14 | Value changed: Nut, connection of bracket for elastomer bearing for front exhaust system | ENGINE 157 in MODEL 222 | |
| 11.9.14 | Value changed: Nut, connection of bracket for elastomer bearing for front exhaust system | ENGINE 278 in MODEL 222 | |
| 11.9.14 | Value changed: Screw/bolt, bracket for exhaust line/reinforcement to frame floor assembly | ||
| 11.9.14 | Value changed: Nut, mounting bracket to oxidation catalytic converter | ENGINE 642 in MODEL 222 | |
| 11.9.14 | Value changed: Pipe clamp, front exhaust system to turbocharger | ENGINE 277 in MODEL 222 |
EXHAUST SYSTEM
| Number | Designation | ENGINE 157 in MODEL 222 | ENGINE 276 in MODEL 222 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-01AN | Screw/bolt, front exhaust system to exhaust line | Nm | 20 | 20 | |
| BA49.10-P-1002-01AN | Screw/bolt at bracket for front exhaust system | Nm | 20 | 20 | |
| BA49.10-P-1003-01AN | Screw/bolt, front exhaust system bracket to transmission | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | - | - | ||
| BA49.10-P-1004-01AN | Nut, connection of bracket for elastomer bearing for front exhaust system | Nm | 20 | 20 | |
| BA49.10-P-1005-01AN | Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support | Nm | 20 | 20 | |
| BA49.10-P-1006-01AN | Screw/bolt, clamp for front/center/rear exhaust system | M8 | Nm | 35 | 35 |
| BA49.10-P-1007-01AN | Screw/bolt, bracket for exhaust line/reinforcement to frame floor assembly | M8 | Nm | 35 | 35 |
| M10 | Nm | 50 | 50 | ||
| BA49.10-P-1008-01AN | Bolt/nut, exhaust system elastomer bearing bracket to rear axle carrier | Nm | 20 | 20 | |
| BA49.10-P-1009-01AN | Screw/bolt, bracket for exhaust system elastomer bearing to rear crossmember | Nm | 20 | 20 | |
| BA49.10-P-1010-01AN | Nut, exhaust system at front right to front left | Nm | - | 20 | |
| BA49.10-P-1011-01AN | Screw/bolt, clamp for oxidation catalytic converter | Nm | - | - | |
| BA49.10-P-1012-01AN | Nut, mounting bracket to oxidation catalytic converter | Nm | - | - | |
| BA49.10-P-1013-01AN | Nut, mounting bracket to bracket | Nm | - | - | |
| BA49.10-P-1014-01AN | Screw/bolt, bracket for oxidation catalytic converter/torsion bar to front axle carrier | M8 | Nm | - | - |
| M10 | Nm | - | - | ||
| BA49.10-P-1015-01AN | Screw/bolt, clamp for front exhaust system to catalytic converter | Nm | - | - | |
| BA49.10-P-1016-01AN | Screw/bolt, bracket for catalytic converter to torsion bar mount | Nm | - | - | |
| BA49.10-P-1017-01AN | Pipe clamp, front exhaust system to turbocharger | Nm | - | - | |
| BA49.10-P-1018-01AN | Screw/bolt, left front exhaust system clamp to right front exhaust system | Nm | - | - | |
| BA49.10-P-1019-01AN | Screw/bolt, catalytic converter to catalytic converter bracket | Nm | - | - | |
| BA49.10-P-1020-01AN | Screw/bolt, catalytic converter bracket to transmission | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA49.10-P-1021-01AN | Screw/bolt, front exhaust system to exhaust system bracket | Nm | - | - | |
| BA49.10-P-1022-01AN | Screw/bolt, front exhaust system bracket to transmission and crankcase | Nm | - | - | |
| BA49.10-P-1023-01AN | Clamp, front exhaust system to turbocharger | Nm | - | - | |
EXHAUST SYSTEM
| Number | Designation | ENGINE 277 in MODEL 222 | ENGINE 278 in MODEL 222 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-01AN | Screw/bolt, front exhaust system to exhaust line | Nm | - | 20 | |
| BA49.10-P-1002-01AN | Screw/bolt at bracket for front exhaust system | Nm | 20 | 20 | |
| BA49.10-P-1003-01AN | Screw/bolt, front exhaust system bracket to transmission | Stage 1 | Nm | 10 | 20 |
| Stage 2 | ∠° | 90 | - | ||
| BA49.10-P-1004-01AN | Nut, connection of bracket for elastomer bearing for front exhaust system | Nm | 20 | 20 | |
| BA49.10-P-1005-01AN | Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support | Nm | 20 | 20 | |
| BA49.10-P-1006-01AN | Screw/bolt, clamp for front/center/rear exhaust system | M8 | Nm | 35 | 35 |
| BA49.10-P-1007-01AN | Screw/bolt, bracket for exhaust line/reinforcement to frame floor assembly | M8 | Nm | 35 | 35 |
| M10 | Nm | 50 | 50 | ||
| BA49.10-P-1008-01AN | Bolt/nut, exhaust system elastomer bearing bracket to rear axle carrier | Nm | 20 | 20 | |
| BA49.10-P-1009-01AN | Screw/bolt, bracket for exhaust system elastomer bearing to rear crossmember | Nm | - | 20 | |
| BA49.10-P-1010-01AN | Nut, exhaust system at front right to front left | Nm | - | - | |
| BA49.10-P-1011-01AN | Screw/bolt, clamp for oxidation catalytic converter | Nm | - | - | |
| BA49.10-P-1012-01AN | Nut, mounting bracket to oxidation catalytic converter | Nm | - | - | |
| BA49.10-P-1013-01AN | Nut, mounting bracket to bracket | Nm | - | - | |
| BA49.10-P-1014-01AN | Screw/bolt, bracket for oxidation catalytic converter/torsion bar to front axle carrier | M8 | Nm | - | - |
| M10 | Nm | - | - | ||
| BA49.10-P-1015-01AN | Screw/bolt, clamp for front exhaust system to catalytic converter | Nm | - | - | |
| BA49.10-P-1016-01AN | Screw/bolt, bracket for catalytic converter to torsion bar mount | Nm | - | - | |
| BA49.10-P-1017-01AN | Pipe clamp, front exhaust system to turbocharger | Nm | 23 | - | |
| BA49.10-P-1018-01AN | Screw/bolt, left front exhaust system clamp to right front exhaust system | Nm | 55 | - | |
| BA49.10-P-1019-01AN | Screw/bolt, catalytic converter to catalytic converter bracket | Nm | 20 | - | |
| BA49.10-P-1020-01AN | Screw/bolt, catalytic converter bracket to transmission | Stage 1 | Nm | 10 | - |
| Stage 2 | ∠° | 90 | - | ||
| BA49.10-P-1021-01AN | Screw/bolt, front exhaust system to exhaust system bracket | Nm | 20 | - | |
| BA49.10-P-1022-01AN | Screw/bolt, front exhaust system bracket to transmission and crankcase | Nm | 38 | - | |
| BA49.10-P-1023-01AN | Clamp, front exhaust system to turbocharger | Nm | 23 | - | |
EXHAUST SYSTEM
| Number | Designation | ENGINE 279 in MODEL 222 | ENGINE 642 in MODEL 222 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-01AN | Screw/bolt, front exhaust system to exhaust line | Nm | - | - | |
| BA49.10-P-1002-01AN | Screw/bolt at bracket for front exhaust system | Nm | - | - | |
| BA49.10-P-1003-01AN | Screw/bolt, front exhaust system bracket to transmission | Stage 1 | Nm | 10 | - |
| Stage 2 | ∠° | 90 | - | ||
| BA49.10-P-1004-01AN | Nut, connection of bracket for elastomer bearing for front exhaust system | Nm | 20 | - | |
| BA49.10-P-1005-01AN | Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support | Nm | 20 | 20 | |
| BA49.10-P-1006-01AN | Screw/bolt, clamp for front/center/rear exhaust system | M8 | Nm | 35 | 35 |
| BA49.10-P-1007-01AN | Screw/bolt, bracket for exhaust line/reinforcement to frame floor assembly | M8 | Nm | 35 | 35 |
| M10 | Nm | 50 | 50 | ||
| BA49.10-P-1008-01AN | Bolt/nut, exhaust system elastomer bearing bracket to rear axle carrier | Nm | 20 | 20 | |
| BA49.10-P-1009-01AN | Screw/bolt, bracket for exhaust system elastomer bearing to rear crossmember | Nm | 20 | 20 | |
| BA49.10-P-1010-01AN | Nut, exhaust system at front right to front left | Nm | - | - | |
| BA49.10-P-1011-01AN | Screw/bolt, clamp for oxidation catalytic converter | Nm | - | 20 | |
| BA49.10-P-1012-01AN | Nut, mounting bracket to oxidation catalytic converter | Nm | - | 20 | |
| BA49.10-P-1013-01AN | Nut, mounting bracket to bracket | Nm | - | 20 | |
| BA49.10-P-1014-01AN | Screw/bolt, bracket for oxidation catalytic converter/torsion bar to front axle carrier | M8 | Nm | - | 25 |
| M10 | Nm | - | 50 | ||
| BA49.10-P-1015-01AN | Screw/bolt, clamp for front exhaust system to catalytic converter | Nm | - | - | |
| BA49.10-P-1016-01AN | Screw/bolt, bracket for catalytic converter to torsion bar mount | Nm | - | - | |
| BA49.10-P-1017-01AN | Pipe clamp, front exhaust system to turbocharger | Nm | 23 | - | |
| BA49.10-P-1018-01AN | Screw/bolt, left front exhaust system clamp to right front exhaust system | Nm | 55 | - | |
| BA49.10-P-1019-01AN | Screw/bolt, catalytic converter to catalytic converter bracket | Nm | 20 | - | |
| BA49.10-P-1020-01AN | Screw/bolt, catalytic converter bracket to transmission | Stage 1 | Nm | 10 | - |
| Stage 2 | ∠° | 90 | - | ||
| BA49.10-P-1021-01AN | Screw/bolt, front exhaust system to exhaust system bracket | Nm | 20 | - | |
| BA49.10-P-1022-01AN | Screw/bolt, front exhaust system bracket to transmission and crankcase | Nm | 38 | - | |
| BA49.10-P-1023-01AN | Clamp, front exhaust system to turbocharger | Nm | 23 | - | |
EXHAUST SYSTEM
| Number | Designation | ENGINE 651 in MODEL 222 | ||
|---|---|---|---|---|
| BA49.10-P-1001-01AN | Screw/bolt, front exhaust system to exhaust line | Nm | - | |
| BA49.10-P-1002-01AN | Screw/bolt at bracket for front exhaust system | Nm | - | |
| BA49.10-P-1003-01AN | Screw/bolt, front exhaust system bracket to transmission | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||
| BA49.10-P-1004-01AN | Nut, connection of bracket for elastomer bearing for front exhaust system | Nm | - | |
| BA49.10-P-1005-01AN | Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support | Nm | - | |
| BA49.10-P-1006-01AN | Screw/bolt, clamp for front/center/rear exhaust system | M8 | Nm | 35 |
| BA49.10-P-1007-01AN | Screw/bolt, bracket for exhaust line/reinforcement to frame floor assembly | M8 | Nm | 35 |
| M10 | Nm | 50 | ||
| BA49.10-P-1008-01AN | Bolt/nut, exhaust system elastomer bearing bracket to rear axle carrier | Nm | 20 | |
| BA49.10-P-1009-01AN | Screw/bolt, bracket for exhaust system elastomer bearing to rear crossmember | Nm | 20 | |
| BA49.10-P-1010-01AN | Nut, exhaust system at front right to front left | Nm | - | |
| BA49.10-P-1011-01AN | Screw/bolt, clamp for oxidation catalytic converter | Nm | 20 | |
| BA49.10-P-1012-01AN | Nut, mounting bracket to oxidation catalytic converter | Nm | 20 | |
| BA49.10-P-1013-01AN | Nut, mounting bracket to bracket | Nm | 20 | |
| BA49.10-P-1014-01AN | Screw/bolt, bracket for oxidation catalytic converter/torsion bar to front axle carrier | M8 | Nm | 25 |
| M10 | Nm | 50 | ||
| BA49.10-P-1015-01AN | Screw/bolt, clamp for front exhaust system to catalytic converter | Nm | 20 | |
| BA49.10-P-1016-01AN | Screw/bolt, bracket for catalytic converter to torsion bar mount | Nm | 20 | |
| BA49.10-P-1017-01AN | Pipe clamp, front exhaust system to turbocharger | Nm | - | |
| BA49.10-P-1018-01AN | Screw/bolt, left front exhaust system clamp to right front exhaust system | Nm | - | |
| BA49.10-P-1019-01AN | Screw/bolt, catalytic converter to catalytic converter bracket | Nm | - | |
| BA49.10-P-1020-01AN | Screw/bolt, catalytic converter bracket to transmission | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||
| BA49.10-P-1021-01AN | Screw/bolt, front exhaust system to exhaust system bracket | Nm | - | |
| BA49.10-P-1022-01AN | Screw/bolt, front exhaust system bracket to transmission and crankcase | Nm | - | |
| BA49.10-P-1023-01AN | Clamp, front exhaust system to turbocharger | Nm | - | |