Steering gear - BA46.20-P-1000-01I
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 156, 169, 176, 242, 245, 246
STEERING GEAR
| Number | Designation | MODEL 117 | MODEL 156 | ||
|---|---|---|---|---|---|
| BA46.20-P-1001-01I | Bolt, rack-and-pinion steering to front axle carrier | Stage 1 | Nm | 40 | 40 |
| Stage 2 | ∠° | 180 | 180 | ||
| BA46.20-P-1002-01I | Bolt, heat shield to steering gear | Nm | 17 | 17 | |
| BA46.20-P-1003-01I | Bolt, motor controller unit (ES) to rack-and-pinion steering | Nm | 23 | 23 | |
| BA46.20-P-1004-01I | Toothed rack | Test torque | Nm | 20 | 20 |
| BA46.20-P-1005-01I | Bolt, heat shield to motor controller unit (ES) | Test torque | Nm | - | - |
| BA46.20-P-1006-01I | Bolt, bracket for mounting clamp for lines to steering gear | Nm | - | - | |
STEERING GEAR
| Number | Designation | MODEL 169 | MODEL 176, 246 | ||
|---|---|---|---|---|---|
| BA46.20-P-1001-01I | Bolt, rack-and-pinion steering to front axle carrier | Stage 1 | Nm | 40 | 40 |
| Stage 2 | ∠° | 90 | 180 | ||
| BA46.20-P-1002-01I | Bolt, heat shield to steering gear | Nm | 10 | 17 | |
| BA46.20-P-1003-01I | Bolt, motor controller unit (ES) to rack-and-pinion steering | Nm | 23 | 23 | |
| BA46.20-P-1004-01I | Toothed rack | Test torque | Nm | 20 | 20 |
| BA46.20-P-1005-01I | Bolt, heat shield to motor controller unit (ES) | Test torque | Nm | 10 | - |
| BA46.20-P-1006-01I | Bolt, bracket for mounting clamp for lines to steering gear | Nm | - | - | |
STEERING GEAR
| Number | Designation | MODEL 242 | MODEL 245 | ||
|---|---|---|---|---|---|
| BA46.20-P-1001-01I | Bolt, rack-and-pinion steering to front axle carrier | Stage 1 | Nm | 40 | 40 |
| Stage 2 | ∠° | 180 | 90 | ||
| BA46.20-P-1002-01I | Bolt, heat shield to steering gear | Nm | 17 | 10 | |
| BA46.20-P-1003-01I | Bolt, motor controller unit (ES) to rack-and-pinion steering | Nm | 23 | 23 | |
| BA46.20-P-1004-01I | Toothed rack | Test torque | Nm | 20 | 20 |
| BA46.20-P-1005-01I | Bolt, heat shield to motor controller unit (ES) | Test torque | Nm | - | 10 |
| BA46.20-P-1006-01I | Bolt, bracket for mounting clamp for lines to steering gear | Nm | 17 | - | |