Rear axle differential ring and pinion - BA35.31-P-1000-01E
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 166, 204, 205, 207, 212, 217, 218, 222, 231, 292
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 166 | Model 204 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø183 | M26 | Nm | 160 | - |
| BA35.31-P-1002-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø187 | M26 | Nm | 130 | 130 |
| BA35.31-P-1003-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø197 | M31 | Nm | 160 | - |
| BA35.31-P-1004-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M29 | Nm | 130 | 130 |
| BA35.31-P-1005-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø205 | M31 | Nm | 160 | - |
| BA35.31-P-1006-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø215 | M29 | Nm | 130 | 130 |
| BA35.31-P-1007-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø225 | M32 | Nm | 210 | - |
| BA35.31-P-1008-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø240 | M32 | Nm | - | - |
| BA35.31-P-1009-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M22 | Nm | - | 100 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 205 | Model 207 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø183 | M26 | Nm | 120 | - |
| BA35.31-P-1002-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø187 | M26 | Nm | - | 130 |
| BA35.31-P-1003-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø197 | M31 | Nm | - | - |
| BA35.31-P-1004-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M29 | Nm | 120 | 130 |
| BA35.31-P-1005-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø205 | M31 | Nm | - | - |
| BA35.31-P-1006-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø215 | M29 | Nm | 120 | 130 |
| BA35.31-P-1007-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø225 | M32 | Nm | - | - |
| BA35.31-P-1008-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø240 | M32 | Nm | - | - |
| BA35.31-P-1009-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M22 | Nm | - | - |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 212 | Model 217 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø183 | M26 | Nm | - | - |
| BA35.31-P-1002-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø187 | M26 | Nm | 130 | - |
| BA35.31-P-1003-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø197 | M31 | Nm | - | - |
| BA35.31-P-1004-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M29 | Nm | 130 | 130 |
| BA35.31-P-1005-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø205 | M31 | Nm | - | - |
| BA35.31-P-1006-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø215 | M29 | Nm | 130 | 130 |
| BA35.31-P-1007-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø225 | M32 | Nm | - | - |
| BA35.31-P-1008-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø240 | M32 | Nm | - | 210 |
| BA35.31-P-1009-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M22 | Nm | 100 | - |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 218 | Model 222 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø183 | M26 | Nm | - | - |
| BA35.31-P-1002-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø187 | M26 | Nm | 130 | 130 |
| BA35.31-P-1003-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø197 | M31 | Nm | - | 130 |
| BA35.31-P-1004-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M29 | Nm | 130 | 130 |
| BA35.31-P-1005-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø205 | M31 | Nm | - | 130 |
| BA35.31-P-1006-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø215 | M29 | Nm | 130 | 130 |
| BA35.31-P-1007-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø225 | M32 | Nm | - | - |
| BA35.31-P-1008-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø240 | M32 | Nm | - | 210 |
| BA35.31-P-1009-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M22 | Nm | - | - |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 231 | Model 292 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø183 | M26 | Nm | - | 160 |
| BA35.31-P-1002-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø187 | M26 | Nm | - | - |
| BA35.31-P-1003-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø197 | M31 | Nm | - | 160 |
| BA35.31-P-1004-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M29 | Nm | - | - |
| BA35.31-P-1005-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø205 | M31 | Nm | - | - |
| BA35.31-P-1006-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø215 | M29 | Nm | 130 | 130 |
| BA35.31-P-1007-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø225 | M32 | Nm | - | - |
| BA35.31-P-1008-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø240 | M32 | Nm | 210 | - |
| BA35.31-P-1009-01E | Collar nut, joint flange to drive pinion | Rear axle differential Ø200 | M22 | Nm | - | - |