Rear axle differential ring and pinion - BA35.31-P-1000-01A

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 129, 140, 170, 199, 201, 202, 203, 208, 209, 210, 211, 215, 219, 220, 230

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 129.060	MODEL 129.058/063 as of 6/1/94, 129.059/064
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 129.061/066, 129.058/063 up to 31.05.94	MODEL 129.067, 129.076 up to 1/31/98
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	125

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 129.068, 129.076 as of 2/1/98	MODEL 140.02/03/04/063/1
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 140.05/07	MODEL 170.435
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	125	>90

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 170.444/445/447/449	MODEL 170.465/466
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 199 with rear axle center assembly Ø 210 mm	MODEL 199 with rear axle center assembly Ø 215 mm
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>115	>150

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 202.018/078/120/121/122/125/180/182 except CODE 450	MODEL 202.018/078/120/121/122/125/182 with CODE 450
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>90	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 202.020/022/023/024/025/026/028/029/033/080/081/082/083/086/087/088/089/093/128/133/188/193, 202.085 with 5-speed automatic transmission, 202.134/194 except CODE 450	MODEL 202.085 with 5-speed manual transmission, MODEL 202.134/194 with CODE 450
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 203.004/204 up to 31.08.02 with CODE 450, MODEL 203.006/007/016/064/206/207/216/264/706/707	MODEL 203.004/061/204/261 as of 01.09.02, MODEL 203.008/020/040/042/043/046/052/054/056/081/084/087/092/208/240/242/243/246/252/254/256/281/284/287/292/708/730/731/740/742/743/746
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	150

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 203.018/065/218/265/718	MODEL 203.004/204 up to 31.08.02 except CODE 450, MODEL 203.035/045/235/735/745/747, 203.061/261 up to 31.08.02
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>115	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 203.076/276	MODEL 208.335/344/345/347/348/435/444/445/447/448
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	160	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 208.365/370/465/470	MODEL 208.374
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 209.308/320/341/342/343/354/356/361/420/441/442/454/456/461	MODEL 209.365/375
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	150	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 209.316/372/376/377/465/472/475/476/477 rear axle center assembly Ø 215 mm	MODEL 209.316/376/465/475/476 rear axle center assembly Ø 210 mm
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	160	125

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 210.003/004 except CODE 450	MODEL 210.006/015/017/025/045/053/055/063/065/08/206/215/217/225/245/263/265/281/282/283/606/663, 210.007 with CODE 450
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>90	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 210.003/004 with CODE 450, MODEL 210.007 except CODE 450, MODEL 210.010/020/035/037/048/061/062/210/235/237/248/261/262/610	MODEL 210.070/074/270/274 up to 31.01.98, 210.072/272/617
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	150

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 210.016/026/226/616, 210.070/074/216/270 ab 01.02.98	MODEL 211 (except 211.004/042/061/242/261) with rear axle center assembly Ø 187/200/215 mm
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	>160

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 211 (except 211.004/042/061/242/261) with rear axle center assembly Ø 210 mm	MODEL 211 (except 211.004/042/061/242/261) with rear axle center assembly Ø 240 mm
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>115	>115

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 211.004 except CODE 450, MODEL 211.042/061/242/261	MODEL 215.375/378
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	150	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		Model 219 with rear axle differential dia.200 mm dia. 215 mm	MODEL 220.025/026/028/070/075/126/128/170/175/178
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	150	>180

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 220.063/065/067/083/084/087/165/167/183/184/187	MODEL 230 (except 230.467, except model 230.474/475 with rear-axle transmission 210E)
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	>180	160

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 230.467, MODEL 230.474/475 with rear-axle transmission 210E
BA35.31-P-1001-01A	Collar nut, joint flange to drive pinion	Nm	-