Rear axle differential housing - BA35.31-P-1000-02I
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 217, 222
REAR AXLE DIFFERENTIAL HOUSING
| Number | Designation | MODEL 217 | MODEL 222 | ||
|---|---|---|---|---|---|
| BA35.31-P-1001-02I | Screw/bolt, end cover to rear axle differential | Stage 1 | Nm | 30 | 30 |
| Stage 2 | ∠° | 45 | 45 | ||
| BA35.31-P-1002-02I | Screw/bolt, heat sink to end cover | Nm | - | 35 | |
| BA35.31-P-1004-02I | Filling screw on rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1005-02I | Drain screw on rear axle differential | Nm | 50 | 50 | |
| BA35.31-P-1006-02I | Adapter on rear axle housing | Stage 1 | Nm | 110 | 110 |
| Stage 2 | ∠° | 90 | 90 | ||