Rear axle center assembly crown wheel - BA35.31-P-1000-03F
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 171.456, 209.365/465, 211.006/054/056/065/082/087/092/206/254/256/265/282/287/292/606 with rear axle center assembly Ø 198
MODEL 211.004 with CODE 450 (Taxi version) with rear axle center assembly Ø 198
REAR AXLE CENTER ASSEMBLY CROWN WHEEL
| Number | Designation | MODEL 171.456 | MODEL 209.365/465 | |
|---|---|---|---|---|
| BA35.31-P-1001-03F | Retaining bolt, ring gear to differential case | Nm | 85 | 85 |
REAR AXLE CENTER ASSEMBLY CROWN WHEEL
| Number | Designation | MODEL 211.004 with CODE 450, MODEL 211.006/054/056/065/082/087/092/206/254/256/265/282/287/292/606 | MODEL 230.467 | |
|---|---|---|---|---|
| BA35.31-P-1001-03F | Retaining bolt, ring gear to differential case | Nm | 85 | 85 |
REAR AXLE CENTER ASSEMBLY CROWN WHEEL
| Number | Designation | MODEL 230.471/475/476/477, MODEL 230.472/474 except CODE 030 | MODEL 230.472/474 with CODE 030, MODEL 230.479 | |
|---|---|---|---|---|
| BA35.31-P-1001-03F | Retaining bolt, ring gear to differential case | Nm | 140 | 180 |