Rear axle carrier - BA35.10-P-1000-01M
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 221 without CODE Z07 (Top protection) without CODE Z19 (S600 Pullman Guard state sedan)
MODEL 216
CAMSHAFT
| Number | Designation | MODEL 216 | MODEL 221 except 221.176/179 with rear axle center assembly 240V | ||
|---|---|---|---|---|---|
| BA35.10-P-1001-01M | Self-locking screw/bolt, front rear axle carrier rubber bushing to frame floor | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA35.10-P-1002-01M | Self-locking screw/bolt, rear axle carrier rear rubber bushing to frame floor | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA35.10-P-1003-01M | Self-locking screw/bolt, front crossmember to rear axle carrier | Stage 1 | Nm | 50 | 50 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA35.10-P-1004-01M | Self-locking nut securing rear extension bracket to rear axle carrier | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA35.10-P-1005-01M | Bolt, extension bracket to rear axle differential | Nm | 100 | 100 | |
| BA35.10-P-1006-01M | Adapter to rear axle differential | Stage 1 | Nm | 110 | 110 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA35.10-P-1007-01M | Adapter to front transverse bridge | Stage 1 | Nm | 50 | 50 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA35.10-P-1008-01M | Bolt, stop to longitudinal member | Nm | 35 | 35 | |
REAR AXLE CARRIER
| Number | Designation | MODEL 221.176/179 with rear axle center assembly 240V | ||
|---|---|---|---|---|
| BA35.10-P-1001-01M | Self-locking screw/bolt, front rear axle carrier rubber bushing to frame floor | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 90 | ||
| BA35.10-P-1002-01M | Self-locking screw/bolt, rear axle carrier rear rubber bushing to frame floor | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 90 | ||
| BA35.10-P-1003-01M | Self-locking screw/bolt, front crossmember to rear axle carrier | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 90 | ||
| BA35.10-P-1004-01M | Self-locking nut securing rear extension bracket to rear axle carrier | Stage 1 | Nm | 100 |
| Stage 2 | ∠° | 90 | ||
| BA35.10-P-1005-01M | Bolt, extension bracket to rear axle differential | Nm | 120 | |
| BA35.10-P-1006-01M | Adapter to rear axle differential | Stage 1 | Nm | 120 |
| Stage 2 | ∠° | - | ||
| BA35.10-P-1007-01M | Adapter to front transverse bridge | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 90 | ||
| BA35.10-P-1008-01M | Bolt, stop to longitudinal member | Nm | 35 | |