Rear axle carrier - BA35.10-P-1000-01J

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 219

CAMSHAFT

Number	Designation				MODEL 219
BA35.10-P-1001-01J	Self-locking bolt, front rear axle carrier rubber bushing to frame floor	Stage 1		Nm	90
BA35.10-P-1001-01J		Stage 2		∠°	60
BA35.10-P-1002-01J	Self-locking bolt, rear axle carrier rear rubber bushing to frame floor	Stage 1		Nm	90
BA35.10-P-1002-01J		Stage 2		∠°	60
BA35.10-P-1003-01J	Self-locking bolt, rear axle differential at rear to rear axle carrier	Stage 1		Nm	80
BA35.10-P-1003-01J		Stage 2		∠°	60
BA35.10-P-1004-01J	Self-safety bolt, rear axle center assembly at rear at rear axle crossmember	M14 rear	Stage 1	Nm	80
		M14 rear	Stage 2	∠°	60
		M10 front		Nm	65
BA35.10-P-1005-01J	Self-locking screw/bolt, front crossmember to rear axle carrier	Stage 1		Nm	80
BA35.10-P-1005-01J		Stage 2		∠°	60
BA35.10-P-1006-01J	Breakaway torque of self-locking screw at rear rubber mount			Nm	100