Rear axle carrier - BA35.10-P-1000-01I

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 169, 245 (except 245.286)

REAR AXLE CARRIER

Number	Designation				MODEL 169	MODEL 245
BA35.10-P-1001-01I	Bolt, center bearing to body	M16X1.5X180	Stage 1	Nm	200	200
			Stage 2	Nm	loosen	loosen
			Stage 3	Nm	220	220
			Stage 4	∠°	90	90
			Checking torque	Nm	230	230
BA35.10-P-1002-01I	Bolt, Watt strut to rear axle carrier	Stage 1		Nm	50	50
BA35.10-P-1002-01I	Bolt, Watt strut to rear axle carrier	Stage 2		∠°	90	90
BA35.10-P-1003-01I	Bolt, Watt strut to coupler bearing	Stage 1		Nm	40	40
		Stage 2		Nm	loosen	loosen
		Stage 3		Nm	30	30
		Stage 4		∠°	80	80
BA35.10-P-1004-01I	Bolt, rear axle shaft flange to rear axle carrier	Stage 1		Nm	80	80
		Stage 2		Nm	loosen	loosen
		Stage 3		Nm	120	120
BA35.10-P-1005-01I	Bolt, coupler bearing to body	Stage 1		Nm	60	60
		Stage 2		Nm	loosen	loosen
		Stage 3		Nm	80	80
BA35.10-P-1006-01I	Fitted bolt, center bearing to body	M16X1.5X225	Stage 1	Nm	200	200
			Stage 2	Nm	loosen	loosen
			Stage 3	Nm	150	150
			Stage 4	∠°	180	180
			Checking torque	Nm	250	250
BA35.10-P-1007-01I	Bolt, coupler bearing to spare tire well	Stage 1		Nm	60	60
		Stage 2		Nm	loosen	loosen
		Stage 3		Nm	80	80
BA35.10-P-1008-01I	Bolt, coupler bearing strut to body			Nm	-	50
BA35.10-P-1009-01I	Bolt, coupler bearing to coupler bearing strut			Nm	-	50