Wheel location, wheel hub - BA33.20-P-1000-01T
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 217, 222
WHEEL CONTROL, HUB
| Number | Designation | MODEL 217 | MODEL 222 except CODE Z07 | ||
|---|---|---|---|---|---|
| BA33.20-P-1001-01T | Nut, spring control arm to steering knuckle | Nm | 240 | 240 | |
| BA33.20-P-1002-01T | Bolt, spring control arm to front axle carrier | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 180 | 180 | ||
| BA33.20-P-1003-01T | Nut, strut rod to steering knuckle | Nm | 240 | 240 | |
| BA33.20-P-1004-01T | Bolt, strut rod to front axle carrier | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 180 | 180 | ||
| BA33.20-P-1005-01T | Nut, transverse control arm to body | Stage 1 | Nm | 90 | 90 |
| Stage 2 | ∠° | 45 | 45 | ||
| BA33.20-P-1006-01T | Nut, steering knuckle to transverse control arm | Nm | 65 | 65 | |
| BA33.20-P-1007-01T | Bolt, wheel bearing to steering knuckle | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 45 | 45 | ||
| BA33.20-P-1008-01T | Bolt, side shaft to wheel bearing | Stage 1 | Nm | 160 | 160 |
| Stage 2 | ∠° | -90 | -90 | ||
| Stage 3 | Nm | 220 | 220 | ||
| Stage 4 | ∠° | 45 | 45 | ||
WHEEL CONTROL, HUB
| Number | Designation | MODEL 222 with CODE Z07 | ||
|---|---|---|---|---|
| BA33.20-P-1001-01T | Nut, spring control arm to steering knuckle | Nm | 240 | |
| BA33.20-P-1002-01T | Bolt, spring control arm to front axle carrier | Stage 1 | Nm | 100 |
| Stage 2 | ∠° | 180 | ||
| BA33.20-P-1003-01T | Nut, strut rod to steering knuckle | Nm | 240 | |
| BA33.20-P-1004-01T | Bolt, strut rod to front axle carrier | Stage 1 | Nm | 100 |
| Stage 2 | ∠° | 180 | ||
| BA33.20-P-1005-01T | Nut, transverse control arm to body | Stage 1 | Nm | 90 |
| Stage 2 | ∠° | 45 | ||
| BA33.20-P-1006-01T | Nut, steering knuckle to transverse control arm | Nm | 65 | |
| BA33.20-P-1007-01T | Bolt, wheel bearing to steering knuckle | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 45 | ||
| BA33.20-P-1008-01T | Bolt, side shaft to wheel bearing | Stage 1 | Nm | 160 |
| Stage 2 | ∠° | -90 | ||
| Stage 3 | Nm | 220 | ||
| Stage 4 | ∠° | 45 | ||