Wheel location, wheel hub - BA33.20-P-1000-01S
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 231
WHEEL CONTROL, HUB
| Number | Designation | Model 231 | ||
|---|---|---|---|---|
| BA33.20-P-1001-01S | Nut, spring control arm to steering knuckle | Nm | 250 | |
| BA33.20-P-1002-01S | Bolt, spring control arm to front axle carrier | Stage 1 | Nm | 100 |
| Stage 2 | ∠° | 180 | ||
| BA33.20-P-1003-01S | Nut, strut rod to steering knuckle | Nm | 250 | |
| BA33.20-P-1004-01S | Bolt, strut rod to front axle carrier | Stage 1 | Nm | 100 |
| Stage 2 | ∠° | 180 | ||
| BA33.20-P-1005-01S | Nut, upper transverse control arm to body | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 90 | ||
| BA33.20-P-1006-01S | Nut, upper ball joint for upper transverse control arm to steering knuckle | Nm | 65 | |
| BA33.20-P-1007-01S | Nut, follower joint to upper transverse control arm | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 45 | ||
| BA33.20-P-1008-01S | Bolt, wheel bearing to steering knuckle | Nm | 80 | |