Wheel location, wheel hub - BA33.20-P-1000-01R
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
Model 166, 292
WHEEL CONTROL, HUB
| Number | Designation | Model 166 | Model 292 | ||
|---|---|---|---|---|---|
| BA33.20-P-1001-01R | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 45 | 45 | ||
| BA33.20-P-1002-01R | Self-locking nut, upper transverse control arm to front end | Stage 1 | Nm | 50 | 50 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA33.20-P-1003-01R | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA33.20-P-1004-01R | Screw/bolt, lower transverse control arm at front to front axle carrier | Stage 1 | Nm | 120 | 120 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA33.20-P-1005-01R | Nut, lower control arm at bottom rear to front axle carrier | Stage 1 | Nm | 65 | 65 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA33.20-P-1006-01R | Locking slotted nut, supporting ball joint to steering knuckle | Nm | 450 | 450 | |
| BA33.20-P-1007-01R | Screw/bolt, lower transverse control arm at outside rear to front axle carrier | Stage 1 | Nm | 130 | 130 |
| Stage 2 | ∠° | 45 | 45 | ||