Wheel location, wheel hub - BA33.20-P-1000-01O
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212
WHEEL CONTROL, HUB
| Number | Designation | MODEL 212 except 4MATIC | MODEL 212 with 4MATIC | |||
|---|---|---|---|---|---|---|
| BA33.20-P-1001-01O | Bolt for locknut on front-wheel mounting | Nm | 11 | - | ||
| BA33.20-P-1002-01O | Locknut (repair kit), strut rod to integral carrier | Stage 1 | Nm | 120 | 120 | |
| Stage 2 | ∠° | 180 | 180 | |||
| BA33.20-P-1003-01O | Locknut (repair kit), strut rod to integral carrier | M14X1.5X11.9 | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 180 | 180 | |||
| BA33.20-P-1004-01O | Locknut, strut rod to steering knuckle | Stage 1 | Nm | 50 | 50 | |
| Stage 2 | ∠° | 90 | 90 | |||
| BA33.20-P-1005-01O | Bolt to locknut for cross strut on integral carrier | Stage 1 | Nm | 120 | 120 | |
| Stage 2 | ∠° | 180 | 180 | |||
| BA33.20-P-1006-01O | Locknut (repair kit), cross strut to integral carrier | M14X120X11.9 | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 180 | 180 | |||
| BA33.20-P-1007-01O | Locknut, cross strut to steering knuckle/upper ball joint | Stage 1 | Nm | 50 | 50 | |
| Stage 2 | ∠° | 90 | 90 | |||
| BA33.20-P-1008-01O | Nut, upper ball joint to steering knuckle | Stage 1 | Nm | 70 | - | |
| Stage 2 | ∠° | 50 | - | |||