Wheel location, wheel hub - BA33.20-P-1000-01J
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 164.1/8
WHEEL CONTROL, HUB
| Number | Designation | MODEL 164.1/8 | ||
|---|---|---|---|---|
| BA33.20-P-1001-01J | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 90 | ||
| BA33.20-P-1002-01J | Self-locking nut of upper wishbone on front end | Nm | 61 | |
| BA33.20-P-1003-01J | Self-locking nut, supporting joint to lower transverse control arm | Nm | 230 | |
| BA33.20-P-1004-01J | Self-locking nut, lower front transverse control arm to front axle carrier | Nm | 270 | |
| BA33.20-P-1005-01J | Bolt, lower transverse control arm at inside rear to front axle carrier | Nm | 220 | |
| BA33.20-P-1006-01J | Locking slotted nut, supporting joint to steering knuckle | Nm | 300 | |
| BA33.20-P-1007-01J | Bolt, lower transverse control arm at outside rear to front axle carrier | Nm | 180 | |