Wheel location, wheel hub - BA33.20-P-1000-01H
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 240
WHEEL CONTROL, HUB
| Number | Designation | MODEL 240 | ||
|---|---|---|---|---|
| BA33.20-P-1001-01H | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | 35 |
| Stage 2 | ∠° | 90 | ||
| BA33.20-P-1002-01H | Self-locking nut, supporting joint to steering knuckle | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 90 | ||
| BA33.20-P-1003-01H | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | 60 |
| Stage 2 | ∠° | 120 | ||
| BA33.20-P-1004-01H | Self-locking nut of upper wishbone on front end | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 180 | ||
| BA33.20-P-1005-01H | Self-locking nut, lower wishbone to front axle carrier | Stage 1 | Nm | 160 |
| Stage 2 | loosen | |||
| Stage 3 | Nm | 100 | ||
| Stage 4 | ∠° | 180 | ||
| BA33.20-P-1006-01H | Steering stop to steering knuckle | Nm | 45 | |