Front axle shaft - BA33.30-P-1000-02H
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
Model 204, 205, 207, 212, 217, 218, 222, 253
FRONT AXLE SHAFT
| Number | Designation | Model 204 | Model 205 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-02H | Bolt, front axle shaft to wheel hub | Stage 1 | Nm | 160 | 160 |
| Stage 2: Unfasten | loosen | ≈-90° | |||
| Stage 3 | Nm | 120 | 220 | ||
| Stage 4 | ∠° | 90 | 45 | ||
FRONT AXLE SHAFT
| Number | Designation | Model 207 | Model 212 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-02H | Bolt, front axle shaft to wheel hub | Stage 1 | Nm | 160 | 160 |
| Stage 2: Unfasten | loosen | loosen | |||
| Stage 3 | Nm | 120 | 120 | ||
| Stage 4 | ∠° | 90 | 90 | ||
FRONT AXLE SHAFT
| Number | Designation | Model 217 | Model 218 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-02H | Bolt, front axle shaft to wheel hub | Stage 1 | Nm | 160 | 160 |
| Stage 2: Unfasten | ≈-90° | loosen | |||
| Stage 3 | Nm | 220 | 120 | ||
| Stage 4 | ∠° | 45 | 90 | ||
FRONT AXLE SHAFT
| Number | Designation | Model 222 | Model 253 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-02H | Bolt, front axle shaft to wheel hub | Stage 1 | Nm | 160 | 160 |
| Stage 2: Unfasten | ≈-90° | ≈-90° | |||
| Stage 3 | Nm | 220 | 220 | ||
| Stage 4 | ∠° | 45 | 45 | ||