Drive shaft - BA33.30-P-1000-07D
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 156, 176, 242, 246
DRIVE SHAFT
| Number | Designation | MODEL 117 | MODEL 156 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-07D | Bolt, front axle shaft to wheel hub | Stage 1 | Nm | 120 | 120 |
| Stage 2 | loosen | Loosen | |||
| Stage 3 | Nm | 150 | 150 | ||
| Stage 4 | ∠° | 45 | 45 | ||
| BA33.30-P-1002-07D | Bolt, bearing cap for right front axle shaft to crankcase | Nm | 20 | 20 | |
| BA33.30-P-1003-07D | Bolt, bearing bracket for front axle shaft to crankcase/oil pan | Nm | 58 | 58 | |
DRIVE SHAFT
| Number | Designation | MODEL 242 | MODEL 176, 246 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-07D | Bolt, front axle shaft to wheel hub | Stage 1 | Nm | 120 | 120 |
| Stage 2 | loosen | loosen | |||
| Stage 3 | Nm | 150 | 150 | ||
| Stage 4 | ∠° | 45 | 45 | ||
| BA33.30-P-1002-07D | Bolt, bearing cap for right front axle shaft to crankcase | Nm | 20 | 20 | |
| BA33.30-P-1003-07D | Bolt, bearing bracket for front axle shaft to crankcase/oil pan | Nm | 58 | 58 | |